by James J Keene PhD
email: jamesjkeene@gmail.com
© 1994-2020 James J Keene
[Updated: Nov. 2, 2020]
Abstract
Binary mechanics (BM) used a pair of relativistic Dirac spinor equations of opposite handedness to guide quantization of space and time into binary bit loci in a cubic lattice restricted to zero or one states. The exact time development of this BM state vector is determined by the four bit operations -- unconditional, scalar, vector and strong -- applied sequentially, one each in a quantized time unit.
Contents
INTRODUCTION
THE THEORY OF BINARY MECHANICS
Unconditional Bit Motion
Electromagnetic Force
Vector Potential
Energy Conservation
Three Dimensional Spatial Format
Strong Force
Bit State Time Development
Electrons, Positrons and d Quarks and Antiquarks
2. Spot Handedness
3. Spot Color Charge
Number of d Quark Spots
Photons and Gluons
Lite Scattering Interactions
Neutrinos
Weak Force
Grand Unification
Pauli Spin Matrices
Four-Momentum Operator
Electromagnetic Four-Potential
Intrinsic Limitations of the Wave Function
In the theory of binary mechanics to be presented, elementary particles are compositions of smaller entities, called binary units or bits. Fundamental physical constants, such as particle quantum numbers and masses, coupling constants, Planck's constant and the velocity of light, are seen in binary mechanics to result from a smaller set of more primary physical constants for energy, length and time. All known forces of nature including gravitation are unified by simple binary operations. In short, our universe is binary.
There are no continuous variables in binary mechanics. Zero and one are the only permissible bit states at any space-time location which may have only integer coordinate values. Thus, binary mechanics may be viewed as completing a historical trend culminating in the quantization of space and time.
The development of binary mechanics was guided by the representation of the relativistic Dirac equation by James Hughes (personal communication, 1993), who associated electron spinor components with neighboring, but distinct spatial loci in a cubic lattice. Quantum electrodynamic and chromodynamic dimensions beyond the four space-time dimensions are represented in binary mechanics as events occurring at neighboring spatial locations. For example, spinor and color components correspond to different bit locations.
Natural phenomena result from bit interactions over BM distance unit d. The basic equations of binary mechanics express the exact time-development of bit states in one binary unit of time, designated as a tick. Thus, in both principle and practice, using computer simulation technology, exact results may be obtained. The ability to completely and exactly catalog composition and life cycle of elementary particles (see "The central baryon bit cycle" and "Baryogensis") and their interactions is an example of the utility of binary mechanics. Conduct of the next generations of high energy particle physics experiments using simulation based on binary mechanics, before completion of multi-million dollar apparatus, illustrates the possible economic utility of the theory.
This paper presents the postulates and equations of binary mechanics, the binary mechanical representation of elementary particles, such as leptons, quarks, baryons, photons and gluons, and the correspondence principles relating binary mechanics to quantum mechanical wave functions and operators and to classical mechanics, both in their relativistic forms.
THE THEORY OF BINARY MECHANICS
Binary mechanics will be presented in a representation which is convenient for expression of correspondence principles with quantum mechanical notions. The initial goal will be clarity of presentation of the basic postulates and equations of binary mechanics.
The Spot Unit
The two positive real components of the value of the complex wave function for one spatial dimension at an infinitesimal point in quantum mechanics correspond to a pair of bits residing at a location of finite dimension. The phrase spot unit will designate the spatial volume occupied by this bit pair in one dimension. The two bits in a spot unit, L and M, named the lite and the mite respectively, are restricted to the values or states of zero or one (Eq. 1).
Fig. 1B: Spots 000 and 111
Legend: Spot 000 (left), antimatter positron (e+R) and 111 (right), matter electron (e-L). See "Physical interpretation of binary mechanical space".
A spatial frame, Si, i = 1, 2, 3, is chosen with position in S expressed by integer coordinates, Si, as in a cubic lattice. Spot unit bits, L and M, are oriented parallel to an axis of Si at each coordinate location {S1, S2,S3} called a spot (Fig. 1B). That is, a spot is a three-dimensional assembly of three spot units. The bit function or bit state, B, consists of these six bits -- the L and M bits in each of three spot units at a spot (Eq. 2).
Spot unit parity, P, for a spatial dimension i in S is Si modulo 2 (Eq. 3).
Considering one dimension first, i = 1, omitting subscript i, the substrate for electric and color charges is a sign function of I parity in Si associated with mites (Eq. 5).
Noting that ascending and descending values of spot coordinates, Si, are deemed to be right and left respectively, the substrate for handedness is lite sign and depends on K parity in Si (Eq. 6) where positive and negative lite sign indicates right and left handedness respectively.
Since M and L may not assume negative values, these mite and lite sign functions pertain to relative bit positions and associated physical properties. For each dimension i, four variations of spot units occur (Table 1, Fig. 2): right or left, each with either nit or pit. The spatial arrangement of spot unit bits is listed in Table 1 in the rows labeled B(XYZ)x, B(XYZ)y and B(XYZ)z for the eight permutations of the three parity values XYZ, where x, y and z denote one of three spot units and B components are products of sign functions (Eqs. 5 and 6) with corresponding B bits (Eq. 2).
Unconditional Bit Motion
The unconditional bit operation of the time-development equations of binary mechanics represents a bit shift in the spot unit directions (Fig. 2) and may be expressed as
M(t=1) = Lx(t=0) = 0, 1 (8)
At this level of fineness, the radiation-absorption coupling constants equal one, and hence, are not explicitly written in Eqs. 7 and 8. That is, the strength of different conventional forces, as expressed in values such as the alpha coupling constant is a function of the proportions of selected bit operations in a space volume per unit time, since each bit motion is exactly one unit of distance in one unit of time regardless of the potential (or bit operation) involved.
Electromagnetic Force
To add electromagnetic scalar and vector force bit operations to the lite and mite Eqs. 7 and 8, it is convenient to define a spot cube as the eight spots (Table 1) in the cube with solid diagonal from spot XYZ = 000 to spot XYZ = 111 (Fig. 1C).
Lateral interactions between concurrent and countercurrent spot units mediate scalar potentials between spot cubes and vector potentials within spot cubes respectively (see "Electromagnetic bit operations revised").
Scalar Potential. The classical scalar potential, Φ, is the presence of a concurrent mite, MJ, which has the attribute of electric charge,
Thus, the electric field is the mite distribution in a space volume.
Let e equal the absolute value of the electric charge of a mite. Interaction of mite electric charge and the classical scalar potential, eΦ, corresponds to the product of concurrent mites,
In the scalar force tick, this concurrent mite product (Eq. 10) at t = 0 results in mite motion to lite loci in the spot units if they were in the zero state (empty), as shown in Fig. 2.
The scalar potential Φ is revealed to consist of three spatial components, which is a new result of binary mechanics. For example, in the electron spot (Table 3), mites circulate rapidly among the three spatial dimensions which may explain why directionality of the scalar potential has not yet been observed experimentally.
Vector Potential. In the classical treatment, the vector potential is viewed as the direction of a magnetic field. In binary mechanical countercurrent spot units, the vector potential component A is
Hence, the magnetic field is the lite distribution in a space volume. These lites may exert force on an adjacent countercurrent mite (q)
Table 2: Some Binary Mechanical Expressions
Quantity Logical (True = 1) Algebraic
Mite M M
Lite L L
Scalar Potential Φ MJ MJ
Vector Potential A LK LK
Strong Potential F not (MI and LI) 1 - MILI
not inertia
Color Charge Ci Ii xor In and P(Ii + In)(1 - P(In + Ip))
not In xor Ip
Neutrino vM not M 1 - M
Neutrino vL not L 1 - L
Gravitational ForceAt present gravity is not considered to be fundamental force implemented by postulating an additional bit operation, but rather joins the electroweak and neutral weak forces as consequences of the primary forces (Table 4 below). Other reports (e.g., "Physics news: gravity game-changer", "Gravity looses primary force status" and "Gravity increased by lunar surface temperature differential") argue with supporting data that gravity is a consequence of the four fundamental bit operations -- unconditional, scalar, vector and strong.
Energy Conservation
Annihilation and creation operations at the single bit level have not yet been defined. That is, each 1-state bit may be viewed as one unit of energy, which is conserved.
Three Dimensional Spatial Format
Spatial dimensions i = 1, 2, 3 are considered to be a cyclic ordered set. To generalize Eqs. 1 to 14 for each of three spatial dimensions, rotation matrix, R, a third root of unity, is used (Eqs. 19).
| 0 1 0 | | 0 0 1 | | 1 0 0 |
R = | 0 0 1 |; R2 = | 1 0 0 |; R3 = | 0 1 0 | (19)
| 1 0 0 | | 0 1 0 | | 0 0 1 |
Premultiplication of spot parity values XYZ (Eqs. 4) in S defines|I2| |I1| |I3| |I1| |J2| = R |J1|, for i=2; |J3| = R2 |J1|, for i=3 (20) |K2| |K1| |K3| |K1|where I2J2K2 and I3J3K3 apply to spot units parallel to dimensions i = 2 and 3 respectively.
For example, mite and lite signs are obtained by substitution of I2 and K2 in Eqs. 5 and 6 for i = 2 and of I3 and K3 for i = 3. These results are listed in Table 1 in the rows labeled B(XYZ)y and B(XYZ)z for i = 2 and 3 respectively. J1, J2 and J3 parities are used to identify location in S of concurrent mites with reference to any spot unit. In this text, XYZ = I1J1K1.
Indeed, Eqs. 1 to 18 apply for all three spatial dimensions when the IiJiKi parities applicable to spot unit alignment in S are used (Eqs. 4 and 20). This statement is equivalent to the stipulation that a rotation applied to reference frame S must also be applied to reference parities I1J1K1 (XYZ in Eqs. 4) to maintain invariance of physical phenomena.
Thus far, bit transitions in one spatial dimension, including lateral interactions between parallel spot units in adjacent spots, have been described. Interactions between adjacent pairs of the three spot units within a single spot will now be presented.
Strong Force
The strong force results from interactions between pairs of spatial dimensions at a spot locus (see "Strong operation disabled by inertia"). For a notation expressing the cyclic order of spatial dimensions i, let
The strong force requires a bit gradient within a spot from a source (s) bit in dimension i to a vacant destination (d) bit locus site in dimension n or p: Bs(1 - Bd). Bit transitions from dimension i-to-p or from i-to-n depend on the presence of the strong force between the pairs of dimensions in their cyclic order within a tick interval requiring the strong potential: absence of inertia in the source spot unit (Table 2),
Fin = Bi(1 - Bn)(1 - Bi*) = 0, 1 (25)
Strong interactions Fip and Fin represent intraspot bit gradients between dimensions within a tick interval conditioned by inertia. For example, strong force Fip equals one only if Bi = 1, Bp = 0 and Bi* = 0 (Eq. 24). In effect, Fip implements a simple interdimensional bit transition, which is the mechanism of the strong force.
The i-to-n motion (Eq. 25), x-to-y, y-to-z and z-to-x, is thought to occur in left-handed spots such as the electron. The reverse i-to-p direction of bit motion (Eq. 24), x-to-z, z-to-y and y-to-x in space S, would then occur in right-handed spots (Table 1), such as the positron. Together, this cyclic order of the dimensions in strong bit operations creates chirality associated with spot handedness and spin sign (see "Particle up-down spin and quantized time parity").
In sum, each force -- scalar, vector and strong, is the product of a potential and another factor, namely a mite for scalar and vector bit operations and a source bit (Bi) for the strong bit operation. As described below, Bi* may be viewed as a neutrino bit.
Bit State Time Development
Eqs. 24 and 25 complete the present time development representation of binary mechanics, which may be summarized in bit function
More results of selected applications will now be presented, to further elaborate and justify the basics of binary mechanics. The fundamental justification would be, of course, that the equations provide exact results for all physical phenomena.
SELECTED TOPICS
Scattering
The strong potential "scatters" bits. In subsequent Ticks, the scatter direction is the lite direction of the destination spot unit in the dimension to which the bit scatters (Fig. 3A).
On the other hand, if the strong force equals one and unconditional bit motion is applied, bits will cycle through a series of spot units within or among spots as a result of intraspot bit transitions defining strong interactions (dark gray path in Fig. 3A). These sequences can result in bit cycling where a bit returns to its original locus, an important factor in the binding of bits into elementary particles, which occurs when such a particle is considered to be at rest (see "Proton and electron bit cycles").
Mechanisms determining the form of the Yukawa potential are readily apparent. Let a number of bits be concentrated into a smaller volume, by, say, converging lite energy. The Yukawa potential and the average inter-bit distance will decrease, as the average binary mechanical strong force incidence decreases toward zero. As the strong force incidence decreases, bits will tend to disperse into a larger volume. When bit density decreases, the average strong force incidence increases toward maximum bit cycling, preventing further bit dispersion. In short, the Yukawa potential is a measure of bit cycling, which is an instance of strong force scattering.
As described, all scattering occurs at fixed angles of 90 degrees in S, chosen to establish spatial symmetry. Thus, measured scattering angles distinguish among various interactions by their relation to the proportions of bits scattered in particular interactions over a particular distance and time interval. A complete analysis of scattering data would incorporate possible alterations in observed bit velocities due to scalar or vector forces.
Electrons, Positrons and d Quarks and Antiquarks
The eight spots in a spot cube are associated with the electron, the positron and the six d flavor quarks (Table 1, Fig. 3B and Elementary Particles). These assignments should not be confused with the entirety of the particles themselves. Also, much "heavier" particles associated with very short half-lives can be defined to include spots in multiple spot cubes.
Legend: The white (w) color designation was changed to green in the Standard Model.
To obtain these results, three spot attributes are defined (Table 1): (1) spot electric charge, Q, (2) spot handedness and (3) spot color charge.
1. Spot Electric Charge
Spot electric charge, Q, is defined as the sum of mite signs at a spot, which depend on spot parities Ii (Eq. 5).
= (1/3) ∑ (-1)Si
= (1/3)((-1)I + (-1)J +(-1)K)
= ±1, ±1/3; i = 1, 2, 3 (29)
The signs of the spot electric charges and the ratios of pairs of spot electric charge values both agree with accepted values. Hence, each spot corresponds unambiguously with the lepton and d quark particle and antiparticle assignments in Table 1.
2. Spot Handedness
The handedness of one-spot particles corresponds to spot handedness, H, which is the product of spot lite signs (Eq. 30).
3. Spot Color Charge
The exclusive-or logical function of pairs of spot unit parity values I, J and K, may be written as the parity (Eq. 3) of the sum of two parity values and used to define spot color charges.
g or b = P(J + K);
b or r = P(K + I); r, g, b = 0, 1 (31)
Eqs. 31 may be combined to uniquely define color charges.
g = P(J + K)(1 - P(K + I));
b = P(K + I)(1 - P(I + J)); r, g, b = 0, 1 (32)
Since I parity in each dimension i (Eqs. 20) defines mite sign (Eq. 5), Eq. 33 states that a non-zero color charge Ci occurs when mites Mi and Mn have opposite sign (Ii not equal to In) and Mn and Mp have the same sign (In equal to Ip). If mites Mi, Mn and Mp all have the same sign, as in the lepton spots, all three color charges, Ci, are zero.
The resulting Ci values in a spot cube consist of four mutually exclusive color charge states: red, green, blue and none. Each of the four color charge states, including the none state, is mapped to a pair of particle-antiparticle spots at solid diagonal loci in the spot cube (Fig. 3B). The parity functions in Eq. 33, then, map or project position Xi in S to position, Ci, in a "color" subspace of S, which is identical to one half of a spot cube consisting of antiparticle spots.
Table 1 and Fig. 3B show these results, which correctly assign non-zero color charges to d quarks and zero color charge to electrons and positrons. The product of color charge, Ci, and handedness, H, is displayed in Table 1, for the conventional association of anticolor charges with antiparticles.
Substitution of Eqs. 4 in Eq. 33 emphasizes this definite relation between color charges, Ci, i = 0, 1, 2, 3, for none, red, green and blue respectively, and spatial dimensions i in S. If i = 1,
SU(3) Symmetry Matrices
The conventional values of the two components of color charge at each spot may be obtained from binary mechanical variables by the dot products of mite signs i (Eq. 5) and the diagonal elements i of SU(3) symmetry matrices T3 or T8,
T8(XYZ) = diag(T8)isign(MiXYZ) (35)
T8(XYZ) = sign(M1XYZ) + sign(M2XYZ) - 2sign(M3XYZ) (36)
To summarize, spot electric charge Q, color charges Ci and handedness H unambiguously associate each spot with a distinct particle class. Table 1 presents these results. Binary mechanics unifies electric and color charges, which are both based on mite signs defined by Ii parities.
Because the strong potential can occur in any spot, it functions to bind the bit constituents of d quarks as well as of the electron and positron. The role of the strong force in the internal binding of these leptons is a new result of binary mechanics.
Number of d Quark Spots
Table 3 lists particles which can be defined considering only one spot cube, including quarks and leptons by the number of d quark spot components of each. Quarks and mesons are distinguished by odd and even numbers of d quark spots respectively. The sum of the products of spot color charge (Eq. 33), C(XYZ), and spot handedness (Eq. 30), H(XYZ), modulo 3, equals +1 or -1 for quarks and antiquarks respectively, and equals zero for the leptons and mesons, in agreement with accepted conventions.
Legend: L, left; R, right. r, red; g, green; b; blue. Neutrinos include anti-neutrinos (?) by Majorana concept. The 1994 version of this table is identical to this updated version, except neutrinos have been added and mesons have been removed to be treated in a separate article.
One, three and five d quark components correspond to the three pairs -- d and u, s and c, and b and t respectively -- of quark flavors. The flavor classification is completed by adding positron or electron spots for quarks with +2/3 and -2/3 electric charge, Q, in each of the three rest mass categories. In general, the electric charge, Q, of a particle corresponds to the sum of Q (Eq. 29) over its spot components XYZ.
Leptons are represented similarly. The electron and positron have zero d quark components, while the muon, μ±, and tau, τ±, add the even numbers of two and four d quark spots respectively.
In brief, the analysis thus far has provided a qualitative accounting for the progression of increased rest masses in the three generations of both quarks and leptons. Further, the basis of the larger quark rest masses, compared especially with the electron and positron masses, is no doubt attributable to the d quark bit cycle described above.
The spot components of particles in Table 3 are one-Tick states. If these components define particle composition in an odd or even Tick, then most, if not all, other mite patterns in the alternate parity Tick, such as those shown in Table 3, could presumably occur, with the only constraints being Eqs. 26 and 28. Thus, during multi-Tick intervals, spot cubes may contain representations of two particles from the lepton, quark or meson set, accounting for observed "resonance" states. Further analysis might identify baryon and other states as examples of this sort of multi-Tick resonance and of more complex intercube patterns. For example, the muon, μ±, and charged pion, π±, states are distinguished by assigning the pion d quark components to adjacent extracubic spots, which in the next two Ticks, would converge on a lepton spot, consistent with observed probable decay products of charged pions.
In summary, it appears that a complete listing of quarks and leptons (Table 3) may be based on spot components in a spot cube.
Photons and Gluons
Table 1 and Fig. 3B also categorize lites within and between spot cubes. For any line of spot units extending within and between spot cubes, which may be called a channel, all lites are either gluon or photon bits.
Interactions between sequential spot units along any dimension i, requiring, of course, a two Tick interval, are called direct interactions. Indirect interactions are sequences of direct interactions over four or more Ticks. Intracube and intercube interactions will refer to interactions within and between spot cubes respectively.
All direct interactions involve spot unit pairs of the same handedness linking spots of opposite handedness.
Lites from electron and positron spots -- photon constituents -- may only participate in intracube direct interactions, since the respective lite directions are confined to the spot cube. Further, these photonic lites from lepton spots can only mediate direct interactions between spots associated with either particles or antiparticles, never both. All intracube photonic lites mediate direct interactions linking lepton spots with d quark spots. Finally, all intercube photonic lites originate from d quark spots in one cube and transfer to electron or positron spots in another cube, where the direct interaction links spots of the same particle-antiparticle class.
There are no direct interactions among pairs of electron and positron lepton spots. All interactions between electrons and positrons are intercubic, since there is no intracube lite path linking electron and positron spots, and are indirect, as evident by inspection of Fig. 3 imagining two adjacent spot cubes. Indirect interactions between electron spots or between positron spots are mediated by one d quark spot over four Ticks. Indirect interactions between electron and positron spots require two d quark spots over six Ticks.
Lites of d quark spots are identified as gluonic or photonic on the basis of the direct interactions mediated.
1. Gluonic lites -- gluon constituents -- link d quark spots and mediate intracube and intercube direct interactions only between particle and antiparticle d spot pairs. Color charge transfer is mediated by gluon lite bits in direct interactions between d quark spots as shown in Table 1 and Fig. 3. Intracube gluonic lites form a cyclic path through all of the d quark spots in a spot cube (Fig. 3), utilized in the bit cycling phenomena described above. Intercube gluonic lites may scatter in the next Tick out of the destination cube (Fig. 3).
2. Photonic lites from d quark mites mediate intercube direct interactions with the lepton spots, as stated above.
Lite Scattering Interactions
Bits never collide. Collisions occur between bits and spots. Combination of spot scattering angles (Fig. 3A) and particle identifications (Fig. 3B) define four categories of lite scattering interactions over two Tick intervals.
1. Intracube gluon scattering follows the intracube d quark lite path and consists of gluon-to-gluon interactions at d quark spots, resulting in the intracube bit cycling described above.
2. Intracube photon scattering may convert lepton spot lites to centrifugal d quark lites. That is, d quark spots may scatter intracube photonic lites to gluonic lites exiting a cube.
3. Intercube gluon scattering may convert d quark lites (gluons) entering a cube to a d quark spot into centrifugal d quark lites (photons) exiting the cube.
4. Intercube photon scattering may convert d quark lites (photons) entering a cube to a lepton spot into intracube lepton lites (photons).
Neutrinos
Neutrino constituents are bits in the zero state (Eqs. 37),
Eq. 37 defines one-bit neutrinos. However, any number of n-bit neutrinos may be defined as convenient to study physical phenomena forming desired groups or flavors. For example, the neutrino equivalent for the absence of an electron might consist of a number of zero-state bits located in an electron spot.
Can neutrinos have mass? Yes, in binary mechanics, since mass is an expression of the underlying mechanism related to motion, namely, the difficulty in moving the object, whatever its bit pattern may be.
Eqs. 24 and 25 state that neutrino bits will move along any axis of S or channel as long as the strong force F is zero at each spot unit.
At any spot, a neutrino bit will experience absence of strong force F only when the source bit of F is also in the neutrino zero state. Thus, neutrinos do not display interdimensional, i.e., intraspot, interactions with other neutrinos. On the other hand, if the source bit is present and strong force F as well, the neutrino bit will be replaced by a bit in the one state in the strong interaction transition. But the neutrino bit is not annihilated, since it replaces the one-state source bit. In brief, strong potentials F may scatter neutrino bits between dimensions in the opposite direction as the non-zero, non-neutrino bit.
By definition (Eqs. 24, 25 and 37), a strong force may occur only when a neutrino bit is present. Since resulting strong interactions may occur at electron, positron and d quark spots, neutrino bits affect time development of these leptons and quarks in an identical manner at the spot level of analysis. In particular, observations described as a neutral weak force supposed to be mediated by a Z0 particle, then, correspond to this coupled scattering of electron or positron bits and neutrino bits, which is in fact a strong interaction (Table 4).
Eq. 37 means that neutrino bit interactions with photonic or gluonic lites cannot occur at a single lite locus in a spot unit. However, the scalar force eΦ (Eq. 10) and vector force qA (Eq. 14) both depend on the presence of a neutrino bit, else the mite-to-lite motion is disabled. That is, vL neutrino bits are always required in electromagnetic interactions.
The requirement for neutrino bits in interactions due to the strong or electromagnetic potentials is in general agreement with experiment. Also, by definition, the binary mechanical scalar and vector forces both require the absence of neutrino bits, but the resulting bit motions require vL neutrino bits (see "Fundamental forces in physics").
Weak Force
Weak interactions, purported to be mediated by the W± particles, are already encompassed in Eqs. 24 and 25. This postulate may be illustrated with several examples, which require only unconditional bit motion (Eqs. 7 and 8).
Photonic lites simultaneously emitted by d quark spots in up to three different cubes can converge toward an electron spot in a fourth cube. Meanwhile, if the originating d quarks receive incoming neutrino vL bits during the same Tick, the d quarks would tend to vanish. In the next Tick, the one to three lites become mites at the electron spot. If at this time, the cube containing the electron mites also has d quark mites in at least one spot, then the result is by definition a two-spot u quark particle constituent (Table 3). In sum, the W- constituents are lites in the first Tick and become u quark mites in the second Tick. Hence, given the conditions specified, the W- lites are simply intercube photonic lites mediating a direct intercube interaction.
On the other hand, if there are no d quark mites in the electron spot cube at the second Tick, the electron mites may be distributed to the d quark spots in the same cube after two more Ticks. Depending on the presence of mites in various other spots in this cube at that time, one or more resulting u quark states might occur. Thus, in a four Tick weak interaction, the W particle may consist of photonic lites, then electron mites and finally electron lites. The weak interaction may be completed when the electron lites become d quark mites. Then there are two possibilities. First, two d quark spots can define a resonant state of two d quarks with Q = -2/3. Second, the d quark mites with a positron spot defines a u quark with Q of +2/3; and the W particle would be classed as W+.
Conversely, photonic lites mediating these weak interactions by convergence on positron spots would be classed as W+ and W± for direct (two Ticks) and indirect (four Ticks) interactions respectively.
In the four-Tick weak interactions, the W particles have the mass of their mite components. This treatment of weak interactions reveals that the neutrino bit is most necessarily related to zeroing the initial d quark state. Also, it is not required to postulate neutrino bits traveling backwards in time.
Grand Unification
Table 4 tabulates four primary forces of nature. Hence, binary mechanics encompasses a grand unification.
A primary force of nature was defined above as a distinct type of binary mechanical bit operation. In other words, four primary forces of nature exist arising from the unconditional, scalar, vector and strong bit operations. This categorization is mutually exclusive and thereby permits attainment of increased clarity in analysis of physical phenomena.
A conventional listing of five forces of nature is cross referenced with the four primary forces of binary mechanics in Table 4, which may clarify underlying mechanisms of the conventional forces presented. But measurements and data analysis keyed to some of the listed conventional forces are best viewed as composites of all four primary bit operations, until further analysis clarifies this situation.
As evident in the presentation above and in Table 4, there is not always a one-to-one correspondence between the primary and conventional force classifications. For example, the electromagnetic force consists of two primary forces, which by definition may independently cause bit transitions. Gravitation appears to be a consequence of a combination of primary forces. The neutral weak force is a particular instance of the strong force in binary mechanics as described above.
The electroweak force may be explained by unconditional bit shifts alone (Eqs. 7 and 8). It is arguable whether the electroweak bit transitions should be classed as a force at all, since the bit transitions are unconditional. In this view, favored by the author, there are only three primary forces defined as independent bit transitions modifying unconditional bit shifts. This is only a semantic issue. Time will tell.
The conciseness of binary mechanics provides a means to determine whether a newly observed phenomenon meets the criteria for a new primary force or is merely a pattern of bit states over space and time that had not been previously noted.
The binary mechanical criterion for a primary force may help prevent a proliferation of conventional forces, considering that a single spot cube may alone assume up to 248 distinct states, not to mention purported particles with multi-cube components. In short, binary mechanics may facilitate increased discipline in theoretical physics.
Finally, the theory of binary mechanics allows for the addition of new primary forces should they be discovered. One need only note that the primary forces described thus far do not encompass all possible local bit interactions. Hence, a new primary force might be added, with the expectation that it would not overlap with, or otherwise violate, the presently described primary forces, defined in terms of specific bit operations.
Pauli Spin Matrices
After transforming the binary mechanical bit function (Eq. 2) to a suitable form, quantum mechanical and electrodynamic operators may be obtained from the postulates and equations of binary mechanics.
The bit function, Bi, expressed in Eq. 26, is a binary mechanical analog to the quantum mechanical wave function. Projecting the components, L and M, of B to a complex plane for each spatial dimension i, defines a complex bit function, BC,
In general, the complex bit function BC for each spot XYZ is
First, σz inverts Ii parity along any spot unit axis i in S,
Second, σx inverts Ji parity in spatial dimensions i,
Third, σy inverts Ki parity in spatial dimensions i,
Table 1 presents BC values resulting from Eqs. 39 to 42. The parallel pairs of both concurrent and countercurrent spot units are seen to consist of real and imaginary pairs of both mites and lites. In addition, the mite and lite signs of BC match those of B in Table 1. In this regard, then, the Pauli spin matrices produce identical results as the binary mechanical sign functions (Eq. 5 and 6).
By a similar analysis, the four Dirac spinor components may be uniquely mapped to solid diagonal pairs of spots in the spot cube (James Hughes, personal communication, 1993). These are the same pairs, as shown above, which represent four color states -- red, green, blue and none, and which each include a particle and an antiparticle spot. The spot cube, then, corresponds to two Dirac spinor equations, one for each spot handedness -- right and left. From the perspective of binary mechanics, the improved description of the behavior of the electron achieved by the Dirac spinor components is based on their representation of d quark spots.
When its six components are normalized to unit length, the complex bit function, BC, corresponds to a quantum mechanical amplitude, integrated over the volume of a spot.
Four-Momentum Operator
The four-momentum operator for time development of the state vector, which has the status of a postulate in quantum mechanics, results from unconditional bit motion (Eqs. 7 and 8).
If the complex bit function (Eq. 39) does, indeed, correspond to an amplitude, then the four-momentum operator may be obtained from binary mechanics by simply rewriting the bit shift equations for the complex form, BC, of the bit function, B.
For the dBC/dt operator on the rest mass component, -i,
Table 5: Correspondence With Quantum Mechanic Operators
Spot XYZ 000 001 010 100 011 101 110 111 Comments Symbols + > < + + > - > < + < - - > < - BC(XYZ)x +L+iM -L+iM +iL+ M +L-iM -iL+ M -L-iM +iL- M -iL- M L,M = 0,1 H 1 -1 -1 -1 1 1 1 -1 Handedness dBC/dtTo complete the complex representation of unconditional bit motion, the id/dx momentum components correspond to the required shift of bits between successive spot units along a channel,
-iH +1-i -1-i +i-1 +1+i -i-1 -1+i +i+1 -i+1 +ieΦ +1-i -1-i +i-1 +1+i -i-1 -1+i +i+1 -i+1 +iH -1+i +1+i -i+1 -1-i +i+1 +1-i -i-1 +i-1 -eAH -1+i +1+i -i+1 -1-i +i+1 +1-i -i-1 +i-1
Handedness, H, in Eqs. 43 and 44 is required because the eight spots in a cube correspond to two sets of Dirac equations.
Electromagnetic Four-Potential
Table 5 lists results where the sign of charge e equals -1. Given the concurrent mite product representation of eΦ (Eq. 10),
The -eA operator in the relativistic forms of the Dirac equations for each handedness, H, must be +i since e equals -1 and one of the two multiplicands is imaginary:
Finally, BC(t=1) equals BC(t=0) plus dBC/dt, where
= -i(H - eΦ)BC + H(i - eA)BCx (49)
Intrinsic Limitations of the Wave Function
Several features of Eqs. 49 may be noteworthy. First, the operators obtained from binary mechanics are essentially identical to the postulated quantum electrodynamic operators. Second, the strong potential operators may be readily written for the complex representation BC of the bit function.
Finally, the described differences in the state vectors -- the binary mechanical bit function and the quantum mechanical wave function, pinpoint why quantum mechanical formalism cannot, in principle, provide exact results. Namely, it assumes that bits at different physical locations are positioned at one point. This defect remains even if quantum mechanical calculations are conducted at the same fine scale of binary mechanics.
This oversimplification intrinsic to the quantum mechanical wave function limits the accuracy of calculations at reduced distances and time durations. It also leads to qualitative paradoxes and discrepancies with experimental observation, similar in nature to those found when classical mechanics is applied at an atomic scale.
On the other hand, binary mechanical calculations of physical quantities are, in principle, exact. Therefore, the precision of any calculation of an observable is limited only by the degree of precision, available at the time, of measurements used to set the primary constants of binary mechanics. Thus, the intrinsic limitations of the wave function may be easily remedied by usage of the bit function.
© 1994-2020 James J Keene